Windows 11 preparing automatic repair is a standard Windows delusion that usually occurs when you start Windows Automatic Repair to fix a software-related issue. But rather than repairing the problem, it causes the PC to get stuck on a black screen.

So, if you are also getting frustrated with this annoying error and stuck in the automatic repair loop in your Windows 11 PC, there are a few kinds of solutions that we can propose.

But, just as with every other problem that we are supposed to fix, let’s figure out the root causes of this type of issue. So, let’s start with the guide.

What Are The Causes of Automatic Repair Loop?

  1. The master boot record is part of the file system and helps Windows read whatever it needs to read. If it gets corrupted, the operating system apparently cannot work properly.
  2. Also, if the hard disk drive for the SSD is not connected correctly, meaning it has a loose connector, then the chances are high that you will get this type of error.
  3. It is possible that changing BIOS settings sometimes causes this issue.
  4. It could be a software-related problem because the applications that you are using aren’t compatible with your PC.

However, since we can recognize the root cause or potential originators of this kind of behavior, let’s start with the troubleshooting guide and see one of the most common troubleshooting techniques that help you fix automatic repair loop issues in Windows 11 PC.

Ways to Fix Automatic Repair Loop in Windows 11

You can use various methods to fix this issue, but here, we have only mentioned fixes that our team has tested before. So, you can rely on these methods, as they will not harm your PC.

1. Disable Antivirus Protection

Most of the time, the antivirus causes this kind of issue. So, in my opinion, disabling it will be the right option for you. However, in case you are not familiar with the steps that let you disable it, follow the guidelines we have mentioned below:

  1. First of all, when the Startup Automatic Repair gets pop-ups, you can simply hit the Advanced options .
  2. After that, click on Troubleshoot > Advanced Options .
  3. Then, hover to the Startup Settings and select the Disable early launch anti-malware protection option. Now, reboot your Windows 11 PC and check if the issue gets resolved.

2. Delete Problematic Files

Sometimes, the files that become inexecutable might become the main culprit for this kind of error. So, in case that deleting them is the right option for you. Therefore, to delete them, you need to follow the steps we have mentioned below:

  1. First of all, launch the Command Prompt and use the following command: cd C:\Windows\System32\LogFiles\Srt SrtTrail.txt
  2. Now, when you notice the “ Boot critical file c:\windows\system32\drivers\tmel.sys is corrupt “, then enter the command: cd c:windowssystem32drivers delvsock.sys
  3. That’s it. Now, exit from the command prompt screen and restart your Windows 11 PC.

3. Try to Rebuild BCD

Many users previously reported rebuilding the BCD and gave positive reports regarding fixing this issue. So, we recommend you try this once by following the given steps:

  1. After booting from the System Recovery options, you can launch the Command Prompt .
  2. After that, execute this command: “ bootrec.exe/rebuildbcd, “bootrec.exe/fixmbr ” and “ bootrec.exe /fixboot “.
  3. That’s it. Now, you’ll see that the Automatic Repair Loop gets fixed.

4. Disable Automatic Startup Repair

If this feature is enabled on your Windows 11 PC, we recommend you disable it. It is not always helpful and doesn’t always fix booting issues. So, disabling this option will be the right choice for you.

  1. First, you must access the Advanced Repair Options from the Automatic Repair blue screen.
  2. Then, select the Troubleshoot option and click on the Advanced Options .
  3. Now, on the next page, open the Command Prompt . Then, execute this command: bcdedit /set {default} recoveryenabled No . Once this command gets executed successfully, it will disable automatic startup repair on your Windows 11 PC.

5. Restore Windows Registry

You can also try restoring the Windows Registry using the Command Prompt. So, here are the steps that you need to follow:

  1. Open the Command Prompt and execute the command “ copy c:\windows\system32\config\RegBack* c:\windows\system32\config .”
  2. After that, select everything shown and hit the Enter key. Then, close the window and reboot your Windows 11 PC.

6. Hard Boot Windows

Did you try this before? If not, we highly suggest you try this out, and it will surely help you fix the Automatic Repair Loop. Anyway, here are the necessary steps that you need to use to boot your Windows 11 PC hard:

  1. You can simply hold and press the power button for at least 5-10 seconds until the PC shuts down completely.
  2. Then, wait for 30-40 seconds and boot your PC. Once your PC boots successfully, you’ll notice that the issue doesn’t appear anymore.

7. Reset Your Windows 11 PC

So, even after trying different methods, you’ve noticed that the issue persists. So then, we recommend you to reset your Windows 11 PC once, and to do so, follow these steps:

  1. First of all, go to the Troubleshoot menu, as we have mentioned above.
  2. Then, simply hit the Reset This PC . Now, wait for a few minutes until the process finishes.

8. Boot Your Windows in Safe Mode

Safe Mode boots your system with only the necessary drivers and programs to start the system. If your system tackles the automatic repair loop in Safe Mode, then third-party apps are causing the problem. Therefore, you must identify and remove the specific app from the system.

  1. Click on the Windows key > Power button .
  2. Then press and hold the Shift key and click on Restart together. This will start your system in Recovery Mode.
  3. Then select Troubleshoot and click on Advanced Options .
  4. From Advanced Options, click on Startup Settings .
  5. Here, you have to click on the on-screen Restart button.
  6. The startup settings list will now appear. Select Enable Safe Mode using functional keys. Typically, this key is F4.

9.Use System Restore

System restore is a utility tool that can help to roll back to the last stable version of Windows. Since Windows is stuck in an automatic repair loop, you should try system restore to go back to the working Windows version.

  1. Search for Create a restore point in Windows search, and then click Open .
  2. On the System Protection tab, click on System Restore .
  3. Then click on Next ; after that, select the restore point to use and click on Next.
  4. Lastly, click on the Finish to confirm the restore point.

10. Get the Latest Version of Windows

Windows releases security patches and bug fixes in every update. So if you haven’t updated your system for a long time, then you could experience an automatic repair loop error. As a fix, you have to update your system to get the latest OS to run everything smoothly.

  1. Click on Windows Start and select Settings .
  2. Then click on Windows Update > Check for updates .
  3. You can use all pending updates; now, download and install those updates.

From Editor’s Desk